Dmax Armor for Microsoft Surface Pro X review: An OK $8 anti-glare screen protector with one flaw

Source: Daniel Rubino/Windows Central

Microsoft's Surface refresh this twelvemonth brings a lot of welcomed changes, but i thing that has bothered me on all of them – including the Surface Pro X – is the lack of any anti-glare for the high-quality displays. Companies like HP and Dell take been investing in engineering science that keeps display vigil simply also reduces reflectivity alike to your eyeglasses.

Ane solution, which is e'er far from platonic, is to add together a screen protector. I picked up the $8 Dmax Armor to meet if it made things whatever ameliorate. Information technology turns out it'south a mixed bag.

reduce that glare

Dmax Armor for Microsoft Surface Pro X

$8

Bottom line:. Dmax Armor for Microsoft Surface Pro X gives y'all three screen plastic protectors that are matte and anti-glare. While it is easy to install, the alignment of the protector is far from perfect, with the speaker grills being off-center. The good news is the vigil of the display is not reduced, and the Dmax dramatically reduces glare. For $8 it's not a bad deal, only it could exist amend also.

Pros:

• Extremely affordable
• three protectors in the box
• Very matte and anti-glare
• No display distortions

Cons:

• Speaker grill alignment is off
• No alcohol wipes or dust removal stickers.

What you'll love about Dmax Armor for Surface Pro X

Source: Daniel Rubino/Windows CentralBefore (left) and after (correct) installing the Dmax Armor for Surface Pro X.

The Dmax Armor only costs $8, which is so cheap Amazon will make you add on items to get free shipping with Amazon Prime. For the $8, yous become three protectors, which is excellent in case y'all spiral upwards installing ane with either misalignment or getting dust nether the screen before information technology tin can make contact.

In one case installed, the Dmax drastically reduces glare. The Dmax Armor is entirely matte, simply information technology doesn't cause any weird prism effects or distortions with colors and acuity. When using the Surface Pro X with this screen protector, information technology is much easier on the eyes, and it looks excellent. I like the way this looks.

Installation is easy. Each protector is in its own plastic sleeve for protection. There are besides ii skin away sides – the first one to stick to the Surface Pro 10 – and an outer one that protects the screen protector during installation (which is removed when finished). This design is the platonic installation as it reduces dust particles and also keeps the protector pristine when smoothing out air bubbles.

Touch and inking with the Surface Slim Pen were unaffected with the screen protector. Writing on the display is now more alike to the feel of paper due to the rougher, matte material used - it feels very squeamish, though artists may disapprove.

The material is plastic and not tempered glass, which is adequate for $8.

What you'll hate virtually Dmax Armor for Surface Pro X

Source: Daniel Rubino/Windows Central

The biggest result is alignment. The Dmax Armor is not ideally cutting for the front end-facing speakers. The alignment is excellent for the height of the speaker, but the protector blocks a small area at the bottom. This oversight does not impact the functioning of the speaker, only obviously, this is a design flaw.

While the camera and dual-microphones are cleared from the protector, the design effectually them is merely OK.

Source: Windows FundamentalCamera and microphone alignment is OK.

At that place is no kit in the box for installation. While there is a small dust fabric, Dmax Armor does not include any alcohol wipes, dust-removal stickers, or stickers to align the protector for installation.

Tip: Install all screen protectors in a bathroom later you have run a hot shower for a few minutes. The steam helps to remove whatsoever grit particles from the air, so they don't state on the screen during installation. Employ a piece of tape on 1 side of the protector, lock-in the alignment of the protector. Then peel the back and permit it "autumn" into place. Utilize a credit bill of fare in a screen wipe to remove bubbles.

Finally, while the Dmax Armor is advertised as anti-fingerprint, I found it lacking in this area. The matte protector is better than the Surface Pro X's display without a protector, only I would not call this oleophobic, and you lot still need to wipe it down occasionally.

Should you lot buy the Dmax Armor for Microsoft Surface Pro 10?

Source: Daniel Rubino/Windows Fundamental

The Dmax Armor is a mixed bag. The matte, anti-glare ability delivers, and I enjoy the way the Surface Pro X's display looks. Colors remain vibrant, and there are no odd distortions or prism-like effects. The price at $8 is also meager (especially since Microsoft has a $60 version it sells, which is cool). Plus, you get 3 in the box, which is fantastic.

The downside is obvious. Dmax did a poor task of cutting this to perfectly fit the Surface Pro X's display, specifically its speaker grills. While the edges of the screen are OK and in that location is clearance for the dual-microphones and front-facing cameras, it's hard to give a solid recommendation for this protector.

That said, for $8, if you lot can live with the minor defect and you want an anti-glare screen protector, so the Dmax Armor is non a terrible selection, peculiarly if y'all are worried well-nigh scratching the screen. I'yard going to leave it on for now as the benefits outweigh the small con.

Easy on the eyes

Dmax Armor for Microsoft Surface Pro Ten

A matte protector

Dmax Armor for Microsoft Surface Pro Ten is a very affordable matte screen protector for the Surface Pro 10. With 3 protectors included, if you lot spiral upwardly installing it, you have a fill-in ready. There is no distortion, and the Surface Pro X's display is very anti-glare with this installed. Still, misalignment with the speaker grills, while minor, makes information technology difficult to recommend fifty-fifty for this price fully.

We may earn a commission for purchases using our links. Learn more.

UH OH

An net connection will soon exist required when setting up Windows 11 Pro

Microsoft has announced that later this yr, users will exist required to connect to the cyberspace and sign-in with a Microsoft Account during the out of box setup experience on Windows 11 Pro. Microsoft has already been enforcing this requirement on Windows xi Dwelling house since launch last October, and Windows xi Pro is now expected to follow suit soon.

Source: https://www.windowscentral.com/dmax-armor-surface-pro-x-review

Posted by: raybustried.blogspot.com

Share this post